Discuss the technical features of the micro‑water meter and the precautions for its use.
发布时间：2021-12-01
The micro‑water analyzer features a wide measurement range, rapid response time, and short measurement cycles, with intuitive display and simple operation. It is applicable across a broad spectrum of fields, enabling humidity measurement in air, nitrogen, inert gases, and any gas free of corrosive media; it is particularly well suited for measuring the moisture content of SF6 gas. This instrument is ideal for use in power generation, petrochemicals, metallurgy, environmental protection, research institutes, and other sectors, offering exceptional cost‑effectiveness.
The instrument should be placed in a secure location to prevent damage from drops. Avoid severe vibrations. Do not measure corrosive gases. When adjusting the gas flow, open the flow valve slowly until the flow indicator reads approximately 0.5 liters per minute. Before use, ensure the instrument is fully charged. To charge, simply plug the power cord into a 220V outlet—there is no need to turn on the power switch; the instrument will begin charging automatically. Charging typically takes more than 20 hours.
Technical features of the micro‑moisture meter: Rapid measurement—no pre‑heating required upon startup, quickly reaching dew‑point saturation. Fast and gas‑efficient—only about 2 L of gas (at 101.2 kPa) is consumed during a measurement. Self‑locking connector—equipped with an original German‑imported self‑locking connector, ensuring safety, reliability, and leak‑free operation.
Data Storage: Features a high-capacity design, capable of storing up to 60 sets of test data. Clear Display: The LCD screen directly shows dew point, trace moisture (ppm), ambient temperature, ambient humidity, time and date, battery level, and other parameters. Portable Design: The instrument is lightweight, making it easy to carry and use. Built-in Power Supply: Equipped with a rechargeable battery that provides up to 8 hours of continuous operation on a single charge.
2024/06/29
Contact Us
National Service Hotline: 400-027-8938
Mobile (Manager Chen): 133 9714 9829
Address: Building No. 5, Donghu High-tech Industrial Innovation Base, No. 9 Miaoshan Avenue, Miaoshan Development Zone, Jiangxia District, Wuhan City
Scan it
Follow the official mobile website