undefined
Product Center
MengziND-3000E Handheld Ultrasonic Imaging Device
Category:
MengziPartial Discharge-Free Detection and Live On-Line Monitoring Series
Phone: 0512-66101666
Product Description
Product Overview
This product is used in high-voltage switchgear, ring main units, transformers, GIS , overhead lines, cable terminations, cable distribution boxes , Gas system leak detection function Insulation condition monitoring and assessment of equipment. When using this device, please observe the following precautions:
☀ Please at temperature -30 °C～ 50 °C, with relative humidity not exceeding 60 % for indoor use;
☀ Please stay away from flammable and explosive hazardous materials.
☀ For faster charging, please turn off the device before charging. !
☀ If any liquid or corrosive substance comes into contact with the instrument, immediately stop using it and power it off; have it handled by qualified personnel.
☀ All components and accessories must remain intact; if disassembly is absolutely necessary, it must be performed by our company’s after-sales service personnel.
2.2 Brief description
Sonar Acoustic wave data is collected using microphone array technology, and high-definition cameras are employed to achieve acoustic localization. Beamforming is used to analyze the acoustic localization data, yielding spatial distribution information, which is then fused with video footage to generate an acoustic‑image cloud map and displayed dynamically on the screen. 。
2.3 Product Features
Partial Discharge Detection :Real-time detection of partial discharge in power equipment, with precise localization of discharge points. When partial discharge occurs, the acoustic‑imaging module detects the sound waves generated by the discharge, enabling accurate pinpointing of the discharge location. 。
Gas leak detection Any gas leak generates ultrasonic waves; when a gas leak occurs, the acoustic imaging module can detect the resulting sound waves and thereby pinpoint the leak location.
Sound Source Localization: Convert sound into electrical signals and use visual representations to locate sound sources in a clear and efficient manner.
2.4 Product Applications Field
☀ Send, Match Electricity enterprise
☀ Railway system
☀ Petrochemical Power Supply System
☀ Aerospace and aviation inspection field
☀ Automation testing field
■ Technical Specifications
Sound Wave meter Sensor Parameter | ||
Frequency range | 0 ~ 48kHz | |
Measure distance | 0.3 ~ 50m | |
Number of microphones | 64 ~ 128 one | |
Hardware | ||
Shell | ABS | |
Host dimensions | 248*165*55( long * wide * Thick ,mm) | |
Display | 7 Inch capacitive touchscreen, resolution 1280*800 | |
Camera field of view | 58 ° * 27 ° | |
Sampling precision | 12 bit | |
Synchronous mode | Internal synchronization, external synchronization | |
Connector | USB Interface ( also; and; as well as Charge Electrical appliance Loss Enter ) Outside department Sensing vessel Loss Enter Interface | Wi-Fi , Ethernet port, Bluetooth |
SD Card | Standard configuration 128G ~ 256G | |
Built-in battery | 12.6V/5000mAh Lithium battery | |
Image format | JPG | |
Video format | MP4 | |
Video duration | Depends on the memory capacity. | |
Working hours | Approximately 7 hour | |
Charger | 100 ~ 240VAC, 50/60Hz | |
Operating temperature | -30 °C～ 50 °C | |
Humidity | ≤ 60% | |
Volume, weight | 1.3kg | |
Contact Us
National Service Hotline: 400-027-8938
Mobile (Manager Chen): 133 9714 9829
Address: Building No. 5, Donghu High-tech Industrial Innovation Base, No. 9 Miaoshan Avenue, Miaoshan Development Zone, Jiangxia District, Wuhan City
Scan it
Follow the official mobile website